Maeda koki MKCTV type WATER SIGNAL

Home > Manufacturer > MAEDA KOKI > Water Signal >

MKCTV type WATER SIGNAL

[ Flow rate can be seen with the naked eye ]
　 because you are using a transparent tapered tube, with a display red line ball (or float)
　 it is possible to check the approximate flow rate by looking at the relationship between position. [ Flow rate with adjustable valve ] to adjust the miniature valve, by aligning the position of the display the red line the ball 　 is possible to set the required flow rate of. [ With protective cover ] by the metal protective cover, and reduce the possibility of damage due to impact or the like from the outside. [ Mounting orientation does not matter ]attitude of when mounting because it uses a spring inside the upward and downward 　　can be performed and sideways, etc. freely.

　

　

　

Model List

Model	Dimensions (mm)				Standard flow rate (L / min)
Model	Connection	full length	Full width	Depth	minimum	maximum
MKCTV20-1TW	RC1 / 8	115	Thirty	twenty two	One	Five
MKCTV20-2TW	Rc1 / 4	115	Thirty	twenty two	One	Five
MKCTV20-3TW	Rc3 / 8	122	Thirty	twenty five	One	Five

When ordering, quote □ Please specify the inside of.　

Model
MKCTV □□ - □ TW

Regular flow rate
□ L / Min

Example: MKCTV20-2TW regular flow 3L / Min ※ model in the case of the connection R male thread will be MKCTV20- □ TOW. Example: MKCTV20-3TOW standard specification

fluid		water
Flow rate		See above	Please contact us when you hope for more than the standard specification flow rate below -.
Connection		Rc female thread	Changes to the R male thread combination with R male thread is also available.
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tube	acrylic	-
	Fittings	C3604 (brass)	-
	Protective cover	BC (gunmetal)	-
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.
	O-ring	Nitrile rubber	-
	Miniature valve	BC	Production in the lock nut with a valve is also possible.