Maeda Koki MK type OIL SIGNAL

Home > Manufacturer > MAEDA KOKI > Oil Signal >

MK type OIL SIGNAL

[ Flow is visible at a glance ] is a current detector to check the flow of fluid in the movement of the ball of the transparent tube (or float). 　　Flow rate can not be confirmed. [ Mounting orientation does not matter ] attitude of when mounting because it uses a spring inside the upward and downward and 　　can be done sideways, etc. freely .
　

　

Model List

Model	Dimensions (mm)			Examples VG68 40 ℃ case of (L / min)
Model	Port size	full length	Full width	minimum	maximum
MK15-1TL	Rc1 / 8	Fifty	Fifteen	0.005	0.5
MK25-1TL	Rc1 / 8	68	twenty five	0.05	Five
MK25-2TL	Rc1 / 4	68	twenty five	0.3	Five
MK25-3TL	Rc3 / 8	74	twenty five	0.3	Five
MK30-2TL	Rc1 / 4	Ninety	Thirty	1.5	Ten
MK30-3TL	Rc3 / 8	94	Thirty	1.5	Ten
MK30-4TL	Rc1 / 2	Hundred	Thirty	1.5	Ten

※ supplement for the model　type of case where the connection inlet outlet of R male thread will be MK25- □ TOL. Example: MK25-3TOL 　type of case connection entrance of R male thread will be MK25- □ TOML. Example: MK25-3TOML 　the type of case where the connection outlet of R male thread will be MK25- □ TMOL. Example: MK25-3TMOL standard specification

fluid		oil
Connection		Rc female thread	Changes to the R male thread combination with R male thread is also available.
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tube	acrylic	-
	Fittings	C3604 (brass)	Made of SUS are also available.
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.